If you are completely new to OpenWSN, and you are using Linux, read this page first. It will walk you through all the steps to install OpenWSN and explore a number of key features.
...
- compile and run OpenWSN in simulation mode, ping a simulated mote, and interact with it over CoAP.
- program a TelosB OpenMote-CC2538 mote, connect it to your computer, ping it, and interact with it over CoAP.
Info |
---|
|
- a computer running Linux with root access. This page is written with Ubuntu 1218.10 QuantalCosmic.
- optionally, two TelosB motes to play with real hardware.
|
...
...
Code Block |
---|
|
~$ cd Desktop/
~/Desktop$ mkdir openwsn
~/Desktop$ cd openwsn/
~/Desktop/openwsn$ git clone https://github.com/openwsn-berkeley/openwsn-fw.git
[...]
~/Desktop/openwsn$ git clone https://github.com/openwsn-berkeley/openwsn-swopenvisualizer.git
[...]
~/Desktop/openwsn$ git clone https://github.com/openwsn-berkeley/coap.git
[...] |
...
Code Block |
---|
|
~$ cd Desktop/
~/Desktop$ cd openwsn/
~/Desktop/openwsn$ cd openwsn-swopenvisualizer/
~/Desktop/openwsn/openwsn-sw$openvisualizer$ git pull
Already up-to-date.
~/Desktop/openwsn/openwsn-sw$openvisualizer$ cd ..
~/Desktop/openwsn$ cd openwsn-fw/
~/Desktop/openwsn/openwsn-fw$ git pull
Already up-to-date. |
...
Tip |
---|
|
Before you can go on, you need to install some Python packages: Code Block |
---|
| ~/Desktop/openwsn/openwsn-sw/software/openvisualizer$openvisualizer/$ sudo pip install -r requirements.txt
~/Desktop/openwsn/coap/$ sudo pip install -r requirements.txt |
Info |
---|
The current version of pip 8.1.2 has some changes on the source code, which may cause the error: AttributeError: 'Requirement' object has no attribute 'project_name' when use the -r option to install the packages, . If this error happens, try to install those packages one by one as shown previously. |
PySerial is also required and it's available in Debian/Ubuntu. you need to install the PySerial if it's not installed on your machine. Code Block |
---|
| ~/Desktop/openwsn/openwsn-sw/software/openvisualizer$ sudo pip install PySerial |
|
...
Code Block |
---|
|
~/Desktop/openwsn/openwsn-sw/software/openvisualizer$ sudo scons runweb --sim
scons: Reading SConscript files ...
___ _ _ _ ___ _ _
| . | ___ ___ ._ _ | | | |/ __>| \ |
| | || . \/ ._>| ' || | | |\__ \| |
`___'| _/\___.|_|_||__/_/ <___/|_\_|
|_| openwsn.org
scons: done reading SConscript files.
scons: Building targets ...
Copy("bin/openVisualizerApp/sim_files", "../../../openwsn-fw/bsp/boards/python/openwsnmodule_obj.h")
Mkdir("bin/openVisualizerApp/sim_files/linux")
Copy("bin/openVisualizerApp/sim_files/linux/oos_openwsn-x86.so", "../../../openwsn-fw/build/python_gcc/projects/common/oos_openwsn.so")
Copy("bin/openVisualizerApp/sim_files", "../../../openwsn-fw/build/python_gcc/projects/common/oos_openwsn.sopyd")
Delete("build/runui/web_files")
Mkdir("/home/tengfeithomas/Desktop/openwsn/openwsn-sw/software/openvisualizer/build/runui")
Copy("build/runui/web_files", "bin/openVisualizerApp/web_files")
Delete("build/runui/sim_files")
Mkdir("/home/tengfeithomas/Desktop/openwsn/openwsn-sw/software/openvisualizer/build/runui")
Copy("build/runui/sim_files", "bin/openVisualizerApp/sim_files")
uiRunner(["bin/openVisualizerApp/openVisualizerWeb"], ["bin/openVisualizerApp/openVisualizerWeb.py"])
ioctl(TUNSETIFF): Device or resource busy
created following virtual interface:
6: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500
link/none
inet6 bbbb::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::1/64 scope link
valid_lft forever preferred_lft forever
21:57:51 INFO create instance
21:57:51 INFO create instance
21:57:51 INFO create instance
21:57:51 INFO create instance
21:57:51 INFO create instance
21:57:51 INFO create instance
21:57:51 INFO create instance
21:57:51 INFO create instance
21:57:51 INFO create instance
OpenVisualizer
web interface started at 0.0.0.0: 8080
enter 'qquit' to exit
> 21:57:51 INFO 3 [OPENWSN] booted
21:57:51 INFO 2 [OPENWSN] booted
21:57:51 INFO 1 [OPENWSN] booted
|
...
Code Block |
---|
|
~/Desktop/openwsn/openwsn-sw/software/openvisualizer$ ping6 -s 10 bbbb::1415:92cc:0:2
PING bbbb::1415:92cc:0:2(bbbb::1415:92cc:0:2) 56 data bytes
64 bytes from bbbb::1415:92cc:0:2: icmp_seq=1 ttl=64 time=51.1 ms
64 bytes from bbbb::1415:92cc:0:2: icmp_seq=2 ttl=64 time=134 ms
64 bytes from bbbb::1415:92cc:0:2: icmp_seq=3 ttl=64 time=137 ms
64 bytes from bbbb::1415:92cc:0:2: icmp_seq=4 ttl=64 time=101 ms
^C
--- bbbb::1415:92cc:0:2 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 51.172/106.146/137.486/34.713 ms |
...
Code Block |
---|
|
~/Desktop/openwsn/openwsn-sw/software/openvisualizer$ ping6 -s 10 bbbb::1415:92cc:0:3
PING bbbb::1415:92cc:0:3(bbbb::1415:92cc:0:3) 10 data bytes
18 bytes from bbbb::1415:92cc:0:3: icmp_seq=1 ttl=63 time=80.1 ms
18 bytes from bbbb::1415:92cc:0:3: icmp_seq=2 ttl=63 time=105 ms
18 bytes from bbbb::1415:92cc:0:3: icmp_seq=3 ttl=63 time=94.0 ms
18 bytes from bbbb::1415:92cc:0:3: icmp_seq=4 ttl=63 time=147 ms
^C
--- bbbb::1415:92cc:0:3 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3001ms
rtt min/avg/max/mdev = 80.115/106.887/147.964/25.359 ms |
...
Code Block |
---|
|
thomas@Thomas-X61s:~/Desktop/openwsn/openwsn-sw/software/openvisualizer$ sudo scons runweb
scons: Reading SConscript files ...
___ _ _ _ ___ _ _
| . | ___ ___ ._ _ | | | |/ __>| \ |
| | || . \/ ._>| ' || | | |\__ \| |
`___'| _/\___.|_|_||__/_/ <___/|_\_|
|_| openwsn.org
scons: done reading SConscript files.
scons: Building targets ...
Delete("build/runui/web_files")
Mkdir("/home/thomas/Desktop/openwsn/openwsn-sw/software/openvisualizer/build/runui")
Copy("build/runui/web_files", "bin/openVisualizerApp/web_files")
Delete("build/runui/sim_files")
Mkdir("/home/thomas/Desktop/openwsn/openwsn-sw/software/openvisualizer/build/runui")
Copy("build/runui/sim_files", "bin/openVisualizerApp/sim_files")
uiRunner(["bin/openVisualizerApp/openVisualizerWeb"], ["bin/openVisualizerApp/openVisualizerWeb.py"])
Child PID is 2820
scons: done building targets.
thomas@Thomas-X61s:~/Desktop/openwsn/openwsn-sw/software/openvisualizer$ ioctl(TUNSETIFF): Device or resource busy
created following virtual interface:
4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500
link/none
inet6 bbbb::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::1/64 scope link
valid_lft forever preferred_lft forever |
...