Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

All of the information about this open-source board can be found at http://warpwing.sourceforge.net/.

Breakout Daughtercard

You can use the breakout daughtercard to connect wires to the expansion headers of the GINA board.

Image AddedImage Added

This diagram shows, once connected, what the breakout board holes correspond to. The adjacent vertical rows along the left and right edges of the board are simply connected together for convenience, when you add your own wires.

Image Added

Accessories

Battery

We use a lithium-polymer 3.7V 130mAh battery. It weighs 3.6 g and can be charged using the battery charger. It is manufactured by Tenergy as part# 39014. It can purchased from BSD Micro RC or Amazon.

...

  • Use the GINA JTAG Adapter Card to reprogram the GINA and GINA-Basestation boards.

Breakout Daughtercard

You can use the breakout daughtercard to connect wires to the expansion headers of the GINA board.

Image RemovedImage Removed

This diagram shows, once connected, what the breakout board holes correspond to. The adjacent vertical rows along the left and right edges of the board are simply connected together for convenience, when you add your own wires.

...

Tools

Datasheets

Attachments
patterns*.pdf

Test Pads

There are 11 test pads on the GINA2.2 board. You can solder wires and use an oscilloscope to debug these signals which are internal to the board (i.e. are not
brought up to the daughtercard expansion headers).

...

You can download this board's stencil here.

Ordering

...

Information

Digicom is the company which assembled the GINA2.2c boards designed by the Pister group. To order completely assembled GINA2.2c boards from them, follow these instructions prepared by Dr. Paul Samuel from Daedalus Flight Systems.

...

  • If needed, how to modify the Assembly Bill of Materials (BOM) for the GINA2.2c to reflect any components that should not be assembled;
  • If needed, how to modify the Purchasing BOM for the GINA2.2c to reflect any components that should not be purchased by Digicom (either because they are not assembled, or because they are provided by you);
  • Which files to send to Digicom;
  • What information to include in the quote request.

Datasheets

...