Numbering

OpenMote is the generic name of the motes developed by the OpenWSN team. Each version of the board is numbered according to the following rules.

...

• X indicates the technology of the microntroller. Possible values are 8, 16 and 32 for 8-bit, 16-bit and 32-bit microcontrollers;
• A is incremented when the BOM of the board has changed, i.e. a different chip is used on the board. This requires a change in firmware.
• B is incremented when the schematic of the board has changed, i.e. pins are connected differently. This requires a change in firmware.
• C is incremented when the layout of the board has changed, i.e. a new form factor. This does not requires a change in firmware.

OpenMote32 1.0.0

simple_breakout

https://github.com/openwsn-berkeley/openwsn-hw/blob/master/hardware/openmote32_2_0_0/openmote32_2_0_0.sch

...

https://github.com/openwsn-berkeley/openwsn-hw/blob/master/hardware/openmote32_2_0_0/openmote32_2_0_0.brd

xbee_compat

https://github.com/openwsn-berkeley/openwsn-hw/blob/master/hardware/openMote32_1_0_0/xbee_compat.sch

...

(Layout in progress) https://github.com/openwsn-berkeley/openwsn-hw/blob/master/hardware/openMote32_1_0_0/xbee_compat.brd

3D model

(bottom)

(top)

Datasheets