...
from the command line, navigate to
openwsn-sw/software/openvisualizer/bin/openVisualizerApp/
and enter the following command:Code Block python openVisualizerGui.py --sim [--simCount =<number of simulated nodes>]
enter the following command from
openwsn-sw/software/openvisualizer/
:Code Block scons rungui --sim [--simCount =<number of simulated nodes>]
Note | ||
---|---|---|
Brackets are not required when issuing a command. For example, to run a 5 motes simulating network, using following command:
It's the same for following two cases: CLI and Web interface. |
command line interface (CLI)
You have two options to start it:
from the command line, navigate to
openwsn-sw/software/openvisualizer/bin/openVisualizerApp/
and enter the following command:Code Block python openVisualizerCli.py --sim [--simCount =<number of simulated nodes>]
enter the following command from
openwsn-sw/software/openvisualizer/
:Code Block scons runcli --sim [--simCount =<number of simulated nodes>]
...
from the command line, navigate to
openwsn-sw/software/openvisualizer/bin/openVisualizerApp/
and enter the following command:Code Block python openVisualizerWeb.py --sim [--simCount =<number of simulated nodes>]
enter the following command from
openwsn-sw/software/openvisualizer/
:Code Block scons runweb --sim [--simCount =<number of simulated nodes>]