Info |
---|
You will do some basic configuration of routing on computer A and of the |
On computer A
Configure the IPv4 and IPv6 routes to the networks handled by the tun
interface of computer B:
Code Block |
---|
# add IPv4 route to 10.2.0.0/255.255.0.0 network route ADD 10.2.0.0 MASK 255.255.0.0 10.1.0.2 # add IPv6 route to bbbb::/64 network netsh interface ipv6 add route bbbb::/64 "IEEE802.3" aaaa::2 |
On computer B
Use the netsh
command to set the IPv4 and IPv6 addresses of your tun
interface.
...
Code Block |
---|
netsh interface ipv6 delete route bbbb::/64 OpenWSN netsh interface ipv6 add route bbbb::/64 OpenWSN fe80::8 |
Finally, configure routing on computer A:
Code Block |
---|
# add IPv4 route to 10.2.0.0/255.255.0.0 network
route ADD 10.2.0.0 MASK 255.255.0.0 10.1.0.2
# add IPv6 route to bbbb::/64 network
netsh interface ipv6 add route bbbb::/64 "IEEE802.3" aaaa::2 |