FreeRTOS is a popular real-time operating system kernel for embedded devices, that has been ported to more than 35 microcontrollers. It is distributed under the GPL with an optional exception. The exception permits users' proprietary code to remain closed source while maintaining the kernel itself as open source, thereby facilitating the use of FreeRTOS in proprietary applications.
...
| Code Block | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
#ifndef __SCHEDULER_H
#define __SCHEDULER_H
/**
\addtogroup kernel
\{
\addtogroup Scheduler
\{
*/
#include "opendefs.h"
//=========================== define ==========================================
typedef enum {
TASKPRIO_NONE = 0x00,
// tasks trigger by the stack rx
TASKPRIO_STACK_LOWMAC = 0x01,
TASKPRIO_STACK_HIGHMAC = 0x02,
TASKPRIO_STACK_6TOP = 0x03,
TASKPRIO_STACK_IP = 0x04,
TASKPRIO_STACK_ROUTING = 0x05,
TASKPRIO_STACK_TRANSPORT = 0x06,
// tasks going up the stack - sendone and timers
TASKPRIO_SENDDONE_TIMERS_MAC = 0x07,
TASKPRIO_SENDDONE_TIMERS_6TOP = 0x08,
TASKPRIO_SENDDONE_TIMERS_IP = 0x09,
TASKPRIO_SENDDONE_TIMERS_ROUTING = 0x0a,
TASKPRIO_SENDDONE_TIMERS_TRANSPORT = 0x0b,
//app tasks - down the stack
TASKPRIO_APP_HIGH = 0x0c,
TASKPRIO_APP_MED = 0x0d,
TASKPRIO_APP_LOW = 0x0e,
TASKPRIO_MAX = 0x0f,
} task_prio_t;
#define TASK_LIST_DEPTH 10
//=========================== typedef =========================================
typedef void (*task_cbt)(void);
typedef struct task_llist_t {
task_cbt cb;
task_prio_t prio;
void* next;
uint16_t counter;
} taskList_item_t;
//=========================== module variables ================================
typedef struct {
taskList_item_t taskBuf[TASK_LIST_DEPTH];
taskList_item_t* task_list;
uint8_t numTasksCur;
uint8_t numTasksMax;
} scheduler_vars_t;
typedef struct {
uint8_t numTasksCur;
uint8_t numTasksMax;
} scheduler_dbg_t;
//=========================== prototypes ======================================
void scheduler_init(void);
void scheduler_start(void);
void scheduler_push_task(task_cbt task_cb, task_prio_t prio);
/**
\}
\}
*/
#endif |
The implementation is still simple, the main idea is to have 3 FreeRTOS tasks handling the operation of the OpenWSN protocol stack.
- Rx Task: handles callbacks triggered by packets comming from the MAC layer and pushes them up. The usual case is when a packet is received at the Low MAC and this is pushed up the stack until it reaches the target layer (e.g ICMPv6)
- Send Done Task: Once an ACK from a sent packet is received, this confirms the succes on the packet transmission and this information is pushed up the stack for those tasks waiting that notification. Note that this is similar than the previous case but however we prefer to separate in another tasks with lowest priority than that of receiving a packet.
- App Task:
TODO (WIP)