Page Comparison

FreeRTOS is a popular real-time operating system kernel for embedded devices, that has been ported to more than 35 microcontrollers. It is distributed under the GPL with an optional exception. The exception permits users' proprietary code to remain closed source while maintaining the kernel itself as open source, thereby facilitating the use of FreeRTOS in proprietary applications.

FreeRTOS is designed to be small and simple. The kernel itself consists of only three or four C files. To make the code readable, easy to port, and maintainable, it is written mostly in C, but there are a few assembly functions included where needed (mostly in architecture-specific scheduler routines).

FreeRTOS provides methods for multiple threads or tasks, mutexes, semaphores and software timers. A tick-less mode is provided for low power applications. Thread priorities are supported. In addition there are several schemes of memory.

In OpenWSN FreeRTOS has been encapsulate and hidden behind our very simple scheduler.h interface. In that way our code stays agnostic to the underlaying scheduler.

Code Block

language	cpp
theme	Eclipse
firstline	1
linenumbers	true

#ifndef __SCHEDULER_H
#define __SCHEDULER_H

/**
\addtogroup kernel
\{
\addtogroup Scheduler
\{
*/

#include "opendefs.h"

//=========================== define ==========================================

/*typedef enum {
   TASKPRIO_NONE                  = 0x00,
   // tasks trigger by radio
   TASKPRIO_SIXTOP_NOTIF_RX       = 0x01,
   TASKPRIO_SIXTOP_NOTIF_TXDONE   = 0x02,
   // tasks triggered by timers
   TASKPRIO_SIXTOP                = 0x03,
   TASKPRIO_RPL                   = 0x04,
   TASKPRIO_TCP_TIMEOUT           = 0x05,
   TASKPRIO_COAP                  = 0x06,
   TASKPRIO_ADAPTIVE_SYNC         = 0x07, 
   TASKPRIO_OTF                   = 0x08,
   // tasks trigger by other interrupts
   TASKPRIO_BUTTON                = 0x09,
   TASKPRIO_SIXTOP_TIMEOUT        = 0x0a,
   TASKPRIO_MAX                   = 0x0b,
} task_prio_t;
*/
typedef enum {
   TASKPRIO_NONE                  = 0x00,
   // tasks trigger by the stack rx
   TASKPRIO_STACK_LOWMAC          = 0x01,
   TASKPRIO_STACK_HIGHMAC         = 0x02,
   TASKPRIO_STACK_6TOP            = 0x03,
   TASKPRIO_STACK_IP              = 0x04,
   TASKPRIO_STACK_ROUTING         = 0x05,
   TASKPRIO_STACK_TRANSPORT       = 0x06,

   // tasks going up the stack - sendone and timers
   TASKPRIO_SENDDONE_TIMERS_MAC          = 0x07,
   TASKPRIO_SENDDONE_TIMERS_6TOP         = 0x08,
   TASKPRIO_SENDDONE_TIMERS_IP           = 0x09,
   TASKPRIO_SENDDONE_TIMERS_ROUTING      = 0x0a,
   TASKPRIO_SENDDONE_TIMERS_TRANSPORT    = 0x0b,

   //app tasks - down the stack
   TASKPRIO_APP_HIGH              = 0x0c,
   TASKPRIO_APP_MED               = 0x0d,
   TASKPRIO_APP_LOW               = 0x0e,

   TASKPRIO_MAX                   = 0x0f,
} task_prio_t;

#define TASK_LIST_DEPTH           10

//=========================== typedef =========================================

typedef void (*task_cbt)(void);

typedef struct task_llist_t {
   task_cbt                       cb;
   task_prio_t                    prio;
   void*                          next;
   uint16_t                           counter;
} taskList_item_t;

//=========================== module variables ================================

typedef struct {
   taskList_item_t                taskBuf[TASK_LIST_DEPTH];
   taskList_item_t*               task_list;
   uint8_t                        numTasksCur;
   uint8_t                        numTasksMax;
} scheduler_vars_t;

typedef struct {
   uint8_t                        numTasksCur;
   uint8_t                        numTasksMax;
} scheduler_dbg_t;

//=========================== prototypes ======================================

void scheduler_init(void);
void scheduler_start(void);
void scheduler_push_task(task_cbt task_cb, task_prio_t prio);

/**
\}
\}
*/

#endif

TODO (WIP)

Versions Compared

Old Version 1

New Version 2

Key