Done issues

QuickCal implementation for SCuM
FW-862
Update SCuM
FW-830
6LoWPAN fragmentation (FW implementation)
FW-863
Enable FSK-FEC 25kbps for TSCH link using 160ms slot duration
FW-861
Modify bsp_radio_rx project to print out pkt info including frequency offset
FW-859
Add downstream traffic adaptation info in uinject payload
FW-858
encryption keys unitialized, that block the EB transmission
FW-856
Critical error: wrong addr type error makes motes reset.
FW-855
Downstream traffic adaptation is never triggered.
FW-853
Stop upload image if the bootloader backdoor is not configured right
FW-852
Some transmitted packets are not seen by receiver
FW-851
6PCLEAR fails in case of schedule inconsistency due to parent switch
FW-775
Implement downward traffic adaptation
FW-849
Implement autoTx and autoRx cell
FW-848
Reorder the error codes number in opendef.h
FW-845
Packet Buffer Queue is full because of the occupations of many sixtop packets
FW-839
Node keeps receive 6P response with a RESET return code.
FW-825
CJOIN application doesn't have flow control.
FW-844
Implement lowest Rank feature of RPL
FW-821
Add dutyCycle info in uinject application
FW-846
Travis build failed
FW-847
Mercator generates a duplicate IND_RX frame
FW-842
Improve Mercator (03oos_mercator)
FW-841
6P DELETE response is not handled correctly
FW-840
OpenSim hangup when a sixtop error return code is received.
FW-837
Sequence number is NOT updated when an error return code 6P response is received.
FW-838
implement pending frame bit
FW-823
Update bsp_timer and bsp_radio project with calibration
FW-833
Create bsp_cal projects
FW-832
check bsp_uart and bsp_debugpins
FW-831
Firmware implementation of the No Response CoAP option
FW-829
Implement a CoAP app for generation of data according to OpenBenchmark instrumentation
FW-808
OpenBenchmark hooks in firmware for the interface with OpenVisualizer
FW-806
Port L2 security features to iot-lab_m3 nodes.
FW-703
Record the case when an packet is dropped after maxmium retransmissions, desync and booted
FW-822
Increase the number of retries to 15 to implement reliability
FW-827
Remove the blacklist feature
FW-826
neighbor that is blacklisted is never cleared.
FW-824
Sub-GHz at86rf215_spiReadRxFifo function didn't check the size of given buffer
FW-820
Don't remove neighbor marked as parent when cleaning old neighbors
FW-816
openqueue_removeAllCreatedBy() can remove packets currently being transmitted
FW-725
Update the installation of autonomous cell according to MSF-02
FW-795
no free queue buffer error occurs on a mote with 5 6P packet in queue.
FW-817
Handle the case 6P response is received in a wrong state
FW-819
reset neighbor backoff when packet senddone.
FW-818
The numTx and numTxACK of neighbor should only update on dedicated slot
FW-592
RPL needs a thread to change the l2 destination address for IPv6 packet, in case of parent changes.
FW-812
Scheduler task overflow on dagroot when running a 40 nodes network
FW-813
Autonomous cell is not installed after parent is selected.
FW-811
Resolve the issue when the autonomous cell is conflicted with a managed Tx/Rx cell
FW-815
issue 1 of 798

QuickCal implementation for SCuM

Description

Environment

None

Assignee

Tengfei Chang

Reporter

Tengfei Chang

Labels

None

Story Points

20

Fix versions

Affects versions

Priority

Major
Configure