All issues

OpenMote-CC2538 is missing ACK in IAR debugging mode
FW-761
Root mote stops communicating unwished
FW-737
openqueue_removeAllCreatedBy() can remove packets currently being transmitted
FW-725
ping command crashes openvisualizer.
FW-685
The order of IE should be flexible.
FW-661
OpenMote-CC2538 bootloading fails on the OpenUSB board
FW-547
implementation of 6loRH
FW-457
6TOP and 6LoRH implementation
FW-456
ACK synchronization is reversed
FW-429
compilation error for sniffer GD
FW-420
CoAP fails
FW-394
TelosB motes don't sync
FW-368
I have added new application and added the requirements in openwsn.h, openwsn.c files. While compiling I have came across this error. Kindly help me to debug this error. Plz suggest me that where else I have to add rex.h ?
FW-320
Compiling Error in Openvisualizer
FW-319
I am trying to compile the complete OpenWSN firmware as a Python extension module. I got the below errors
FW-317
Stack Overflow in CC2538
FW-315
SAMR21 Project build fail.
FW-289
CC2420 stop listening when packet too long
FW-267
PC->mote UART does work on OpenMoteCC2538
FW-258
z1 build failure on Travis
FW-246
toggling DAGroot on/off causes simulator crash
FW-222
packing problems in mspgcc Ubuntu
FW-209
Error in forcing multi hop
FW-157
OF0 and full "minimal draft" compliance
FW-154
TSCH doesn't work
FW-142
after a long time ping "invalid serial frame" cause motes to hang
FW-126
refrence error in openserial.c
FW-124
unistd in opensi_client.h
FW-105
ping loop causes DAGroot to reboot
FW-103
large advertised dagrank causing sudden dagrank increments
FW-82
TSCH wrong state cause mote to de-sync
FW-77
occasional "header too long" error message
FW-72
ERROR [IEEE802154E] wrong state 15 in startSlot, at slotOffset X
FW-71
pinging a mote 2 hops away causes relaying mote to reset
FW-54
unexplained large time corrections
FW-49
Short network forming duration
FW-854
Stop upload image if the bootloader backdoor is not configured right
FW-852
Packet Buffer Queue is full because of the occupations of many sixtop packets
FW-839
Update SCuM
FW-830
Fix OpenMote-B firmware
FW-769
Openmote node stops communication after about 10 minutes of pinging it using timeslot 15ms
FW-739
oos_macpong build breaks for multiply defined functions
FW-728
Commit and verify MSP430X project compiling with newmspgcc toolchain
FW-695
synchronizePacket() calculates incorrect timer setting when skip slot is enabled
FW-608
Incorrect channel selection when channel hopping and skip slot are both enabled
FW-576
segfault on a particular topology
FW-560
Null pointer dereference when trying to transmit EB packet
FW-518
in 6P reponses, channel offset always == slot offset
FW-510
Fixing Lollipop counter in connectivity experiement (on FW-488 branch)
FW-502
Develop the CC1200 driver.
FW-493
issue 1 of 842

OpenMote-CC2538 is missing ACK in IAR debugging mode

Description

In IAR debugging mode with OpenMote-CC2538, the ACK for 6P packet is missing most of the time.

Environment

IAR for ARM 6.50
IAR Jink debugger

Status

Assignee

Tengfei Chang

Reporter

Tengfei Chang

Labels

None

Story Points

None

Fix versions

Affects versions

1.12.0

Priority

Critical